First, an overview
CX roughing machine is mainly used to remove the waste paper pulping system in light of the pulper and a small amount of heavy impurities and the slurry Hydrapulper second broken solution. With this machine the second gravel extraction, the rougher the bottom sieve sieve to increase its production capacity.
This machine is equivalent to a sealed horizontal hydraulic pulper with a combination of light and heavy impurities Cleaner, compact, high efficiency, the machine set broken solution, impurity, coarse screening and other functions into one, greatly simplifying the paper processes, reduce energy consumption.
Second, the technical performance
CX roughing machine is mainly used to remove the waste paper pulping system in light of the pulper and a small amount of heavy impurities and the slurry Hydrapulper second broken solution. With this machine the second gravel extraction, the rougher the bottom sieve sieve to increase its production capacity.
This machine is equivalent to a sealed horizontal hydraulic pulper with a combination of light and heavy impurities Cleaner, compact, high efficiency, the machine set broken solution, impurity, coarse screening and other functions into one, greatly simplifying the paper processes, reduce energy consumption.
Second, the technical performance
|
型号
|
CXC1.2
|
CXC2
|
CXC3
|
CXC6
|
|
公称容积m3
|
1.2
|
2
|
3
|
6
|
|
处理浓度%
|
4-5
|
|||
|
生产能力t/min
|
0.4
|
0.75
|
1.2
|
2.5
|
|
电机功率kw
|
22-30
|
30-37
|
55
|
110
|
Three, job principle and structure
Roughing machine specially designed low friction vane hydraulic rotor to make into the slurry evenly dispersed, to keep the sieve is not blocked and to prevent impurities broken. The top of the roughing machine are discharged into the cylindrical screen for further separation, discharge of heavy impurities in the bottom of the machine by hydraulic impurity and impurity removal after the slurry is sent through the rear of sieve tube by a slurry.
Roughing machine is mainly composed by the tank, specially designed hydraulic rotor, sieve and gear.
Fourth, the performance characteristics
A. Roughing machine slot body clean, pre-screened pulp.
Two. Row of the pulp and remove impurities.
3. Shorten the processing cycle.
4. Improve the capacity of the pulping system.
5 Roughing machine updip underside to protect the rotor is not heavy impurities injury.
6. The design maximum operating pressure 525KPa.
5, operating procedures
A. The slurry broken solution to the pulper in the dilution water.
Two. Open the roughing machine, open the the pulper side the discharge valve, feed valve, open the roughing machine and start the row pump.
3. By adding to the slurry into the tube of the roughing the dilution water, so that the slurry to achieve the required to pump the slurry degree.
4. The slurry row after dilution water to inject a short period of time to flush impurities.
5 Close the valve, hydraulic the impurity machine and row pump.
6. Open the hydraulic purify the bottom valve discharge impurities.
Six, installation
(A) Note
Roughing machine specially designed low friction vane hydraulic rotor to make into the slurry evenly dispersed, to keep the sieve is not blocked and to prevent impurities broken. The top of the roughing machine are discharged into the cylindrical screen for further separation, discharge of heavy impurities in the bottom of the machine by hydraulic impurity and impurity removal after the slurry is sent through the rear of sieve tube by a slurry.
Roughing machine is mainly composed by the tank, specially designed hydraulic rotor, sieve and gear.
Fourth, the performance characteristics
A. Roughing machine slot body clean, pre-screened pulp.
Two. Row of the pulp and remove impurities.
3. Shorten the processing cycle.
4. Improve the capacity of the pulping system.
5 Roughing machine updip underside to protect the rotor is not heavy impurities injury.
6. The design maximum operating pressure 525KPa.
5, operating procedures
A. The slurry broken solution to the pulper in the dilution water.
Two. Open the roughing machine, open the the pulper side the discharge valve, feed valve, open the roughing machine and start the row pump.
3. By adding to the slurry into the tube of the roughing the dilution water, so that the slurry to achieve the required to pump the slurry degree.
4. The slurry row after dilution water to inject a short period of time to flush impurities.
5 Close the valve, hydraulic the impurity machine and row pump.
6. Open the hydraulic purify the bottom valve discharge impurities.
Six, installation
(A) Note
