First, an overview
Sewage treatment has been a major problem facing paper manufacturers, it is concentrated in the technical difficulties, high costs, especially in the State and its citizens increasingly important for environmental protection, more challenge to the survival of the paper mill house. Our U.S. patented technology developed by ZJF CAF equipment can solve this problem.
One of the flotation sedimentation system is specifically designed to remove grease in industrial and urban sewage, jelly and solid floating suspended matter from waste water in this system can automatically isolate these substances. CAF in ZJF the help of chemical flocculants can greatly reduce the BOD and COD content of industrial wastewater, sewage treatment to achieve the emission standards or less, thereby reducing the sewage charges. Another important aspect is a byproduct of wastewater treatment often can be recycled and re-use.
Advantage of one of the two, flotation sedimentation
A saving investment
The flotation precipitation one can remove the grease from sewage, jelly, solid floating suspended matter, BOD and COD, it handles the middle of the waste water and white water can significantly reduce the chemical and biological secondary treatment (if using waste paper as raw material, after de- ink, bleach and other process wastewater generated without chemical and biological secondary treatment can be discharged into the standard) size of the equipment, thus greatly reducing the overall investment costs. The flotation precipitate one machine does not require pressure vessels, air compressors and circulation pumps and other equipment, thus greatly reducing the sewage pretreatment investment costs.
B, low running costs
Minimal power consumption by the entire flotation sedimentation machine, only the equivalent of the traditional dissolved air flotation (DAF), 1/8-1/10. Maintenance and manual very little can be done unattended operation.
C, high efficiency
Contrary to the traditional grease traps (gravity sedimentation pond and separator tank), the precipitate flotation machine is solid sludge automatically and continuously removed from the wastewater. Removal and storage of the sludge is concentrated, and therefore also reduces the cost of sludge treatment.
D, superior performance
Each set of flotation precipitation one standard handling capacity of up to 500 m3 / h. Different flow devices can be designed according to customer requirements. The amount of water into ZJF do not need to maintain balance, even if the change in flow rate, the device can also work properly. Under normal circumstances, grease and suspended solids (SS) removal of more than 95%. Clearly, the removal of grease and suspended solids, COD and BOD load greatly reduced.
E, simple operation
Flotation sedimentation one machine is not complicated, and only two mechanical part, without the labor involved.
F, odor mitigate
One of the flotation sedimentation wastewater treatment is an aerobic process. By the odor of grease traps (gravity sedimentation pond and separator tank) to produce a good solution. The other hand, the sludge is removed in the "fresh" state, so increase the possibility of re-use of solid, reducing the handling of trouble.
G, easy to install
Civil engineering in particular, supporting one of the flotation sedimentation, ground, underground or height can be installed, and a very short time-consuming.
H, small footprint
Processing capacity of 5-500 cubic meters / hour CAF equipment installation covers an area of only 2.5-90 square meters.
I, with high technical content
The flotation precipitated one by the United States and many other countries and regions, protection of proprietary products, with international advanced level of the nineties.
, Flotation sedimentation one machine models, power, appearance, size
Sewage treatment has been a major problem facing paper manufacturers, it is concentrated in the technical difficulties, high costs, especially in the State and its citizens increasingly important for environmental protection, more challenge to the survival of the paper mill house. Our U.S. patented technology developed by ZJF CAF equipment can solve this problem.
One of the flotation sedimentation system is specifically designed to remove grease in industrial and urban sewage, jelly and solid floating suspended matter from waste water in this system can automatically isolate these substances. CAF in ZJF the help of chemical flocculants can greatly reduce the BOD and COD content of industrial wastewater, sewage treatment to achieve the emission standards or less, thereby reducing the sewage charges. Another important aspect is a byproduct of wastewater treatment often can be recycled and re-use.
Advantage of one of the two, flotation sedimentation
A saving investment
The flotation precipitation one can remove the grease from sewage, jelly, solid floating suspended matter, BOD and COD, it handles the middle of the waste water and white water can significantly reduce the chemical and biological secondary treatment (if using waste paper as raw material, after de- ink, bleach and other process wastewater generated without chemical and biological secondary treatment can be discharged into the standard) size of the equipment, thus greatly reducing the overall investment costs. The flotation precipitate one machine does not require pressure vessels, air compressors and circulation pumps and other equipment, thus greatly reducing the sewage pretreatment investment costs.
B, low running costs
Minimal power consumption by the entire flotation sedimentation machine, only the equivalent of the traditional dissolved air flotation (DAF), 1/8-1/10. Maintenance and manual very little can be done unattended operation.
C, high efficiency
Contrary to the traditional grease traps (gravity sedimentation pond and separator tank), the precipitate flotation machine is solid sludge automatically and continuously removed from the wastewater. Removal and storage of the sludge is concentrated, and therefore also reduces the cost of sludge treatment.
D, superior performance
Each set of flotation precipitation one standard handling capacity of up to 500 m3 / h. Different flow devices can be designed according to customer requirements. The amount of water into ZJF do not need to maintain balance, even if the change in flow rate, the device can also work properly. Under normal circumstances, grease and suspended solids (SS) removal of more than 95%. Clearly, the removal of grease and suspended solids, COD and BOD load greatly reduced.
E, simple operation
Flotation sedimentation one machine is not complicated, and only two mechanical part, without the labor involved.
F, odor mitigate
One of the flotation sedimentation wastewater treatment is an aerobic process. By the odor of grease traps (gravity sedimentation pond and separator tank) to produce a good solution. The other hand, the sludge is removed in the "fresh" state, so increase the possibility of re-use of solid, reducing the handling of trouble.
G, easy to install
Civil engineering in particular, supporting one of the flotation sedimentation, ground, underground or height can be installed, and a very short time-consuming.
H, small footprint
Processing capacity of 5-500 cubic meters / hour CAF equipment installation covers an area of only 2.5-90 square meters.
I, with high technical content
The flotation precipitated one by the United States and many other countries and regions, protection of proprietary products, with international advanced level of the nineties.
, Flotation sedimentation one machine models, power, appearance, size
|
型 号
|
能(M3/H)力
|
功(KW)率
|
长(M)
|
宽(M)
|
高(M)
|
|
CXPE-5
|
5
|
1.875
|
2.45
|
0.95
|
1.23
|
|
CXPE--10
|
10
|
1.875
|
3.00
|
1.25
|
1.23
|
|
CXPE--15
|
15
|
1.875
|
4.00
|
1.25
|
1.23
|
|
CXPE--20
|
20
|
1.875
|
4.00
|
1.25
|
1.23
|
|
CXPE--25
|
25
|
3.000
|
4.50
|
1.50
|
1.83
|
|
CXPE--35
|
35
|
3.000
|
4.70
|
1.50
|
1.83
|
|
CXPE--50
|
50
|
3.000
|
5.30
|
1.80
|
1.83
|
|
CXPE--75
|
75
|
3.000
|
8.00
|
1.80
|
1.83
|
|
CXPE--100
|
100
|
3.000
|
7.81
|
2.40
|
1.83
|
|
CXPE--150
|
150
|
3.000
|
11.00
|
2.40
|
1.83
|
|
CXPE--175
|
175
|
5.435
|
13.00
|
2.40
|
1.83
|
|
CXPE--200
|
200
|
5.435
|
15.00
|
2.40
|
1.83
|
|
CXPE--320
|
320
|
7.685
|
15.00
|
3.00
|
1.83
|
|
CXPE--400
|
400
|
7.685
|
16.50
|
3，50
|
1.83
|
|
CXPE--500
|
500
|
7.685
|
20.50
|
4.40
|
1.83
|
