Waste incineration furnace characteristics
Medical incinerator technology, and organization of technical experts to conduct research, development developed with independent intellectual property rights of medical waste incineration equipment. The device is fully closed, small size, high efficiency incineration workers LDF series of medical waste incinerators Shandong Zhucheng Feng Xu, Environmental Protection Equipment Co., Ltd. to the introduction of the world's advanced arts, leading technology and high degree of sound, various types of hospitals , hotels, railway stations, major businesses, enterprises, institutions, ideals waste disposal equipment.
Main features:
Using the gasification burning technology, and applies to the burning of syringes, drip containers, medical equipment and a variety of paper scrap wood, bandages, cotton wool, various medical and dirt with hospitals, medical institutions to exclude all kinds of waste.
2 gasification incineration of garbage generated every day can be a incineration.
Using gasification incineration, co-incineration, burn treatment technologies, so that smoke and dust content below the national provisions of emission standards.
A fully enclosed run, applies to the handling of infectious medical waste, to avoid secondary pollution.
Small size, small footprint.
6. Incinerator points both fuel and gas, users may need to use different types.
The technical characteristics of the incinerator
Medical waste incinerator is currently the most advanced pyrolysis and gasification + surround wind mixed fuel + second burn + burn incineration processing. The incinerator in a combustion chamber design due to the gasification burning technology makes incinerator furnace temperature from 200 ℃ to 400 ℃ goes, garbage in the burning process does not produce clinker, slag, and sintering. Gasification incinerator with direct-fired furnace and other furnace, compared to its dust production is very small, indoor settings in the secondary co-incineration of secondary burning burner ring to wind devices. At high temperatures, the combustible gases in the flue gases to fully burn, high efficiency gasifier produced by gas mixes well with air combustion to prevent the escape of the carbon material in the arrogance and late burning phenomenon occurred. Flue gas into the high-temperature burn chamber used to cut into and combustion air tangential entry, etc. combustion mode, flue gas flue gas dust rotating air flow in the burn room again fully burning, incineration flue gas in the furnace residence time greater than 2 seconds, completely burning the combustible gases in the flue gas and fly ash combustibles in the upper part of the incinerator with dry-type exhaust gas purification equipment, the burning of hydrogen chloride, sulfur oxides adsorption treatment, flue gas odor and other ingredients are broken down at high temperatures. The flue gas purification system is equipped with filter blocks of calcium hydroxide and reaction with acidic gases to reach the adsorption of acid gases, purifying exhaust the purpose. Harmful components in the flue gas to reduce the country "burning of hazardous waste pollution control standard (GB18484-2001)" standard below the specified value.
Incinerator operation control with automatic process control, reducing the degree of workers' labor, the burning of the door, cleaning door design picture-mouth form of the entire seal structure, completely isolated from the incineration furnace and furnace, the formation of negative pressure combustion, to prevent the possibility of secondary pollution, especially infectious hazardous medical waste disposal, the better to highlight its unique advantages.
Medical incinerator technology, and organization of technical experts to conduct research, development developed with independent intellectual property rights of medical waste incineration equipment. The device is fully closed, small size, high efficiency incineration workers LDF series of medical waste incinerators Shandong Zhucheng Feng Xu, Environmental Protection Equipment Co., Ltd. to the introduction of the world's advanced arts, leading technology and high degree of sound, various types of hospitals , hotels, railway stations, major businesses, enterprises, institutions, ideals waste disposal equipment.
Main features:
Using the gasification burning technology, and applies to the burning of syringes, drip containers, medical equipment and a variety of paper scrap wood, bandages, cotton wool, various medical and dirt with hospitals, medical institutions to exclude all kinds of waste.
2 gasification incineration of garbage generated every day can be a incineration.
Using gasification incineration, co-incineration, burn treatment technologies, so that smoke and dust content below the national provisions of emission standards.
A fully enclosed run, applies to the handling of infectious medical waste, to avoid secondary pollution.
Small size, small footprint.
6. Incinerator points both fuel and gas, users may need to use different types.
The technical characteristics of the incinerator
Medical waste incinerator is currently the most advanced pyrolysis and gasification + surround wind mixed fuel + second burn + burn incineration processing. The incinerator in a combustion chamber design due to the gasification burning technology makes incinerator furnace temperature from 200 ℃ to 400 ℃ goes, garbage in the burning process does not produce clinker, slag, and sintering. Gasification incinerator with direct-fired furnace and other furnace, compared to its dust production is very small, indoor settings in the secondary co-incineration of secondary burning burner ring to wind devices. At high temperatures, the combustible gases in the flue gases to fully burn, high efficiency gasifier produced by gas mixes well with air combustion to prevent the escape of the carbon material in the arrogance and late burning phenomenon occurred. Flue gas into the high-temperature burn chamber used to cut into and combustion air tangential entry, etc. combustion mode, flue gas flue gas dust rotating air flow in the burn room again fully burning, incineration flue gas in the furnace residence time greater than 2 seconds, completely burning the combustible gases in the flue gas and fly ash combustibles in the upper part of the incinerator with dry-type exhaust gas purification equipment, the burning of hydrogen chloride, sulfur oxides adsorption treatment, flue gas odor and other ingredients are broken down at high temperatures. The flue gas purification system is equipped with filter blocks of calcium hydroxide and reaction with acidic gases to reach the adsorption of acid gases, purifying exhaust the purpose. Harmful components in the flue gas to reduce the country "burning of hazardous waste pollution control standard (GB18484-2001)" standard below the specified value.
Incinerator operation control with automatic process control, reducing the degree of workers' labor, the burning of the door, cleaning door design picture-mouth form of the entire seal structure, completely isolated from the incineration furnace and furnace, the formation of negative pressure combustion, to prevent the possibility of secondary pollution, especially infectious hazardous medical waste disposal, the better to highlight its unique advantages.
