The Zhucheng innovative Chinese Environmental Science and Technology is a research and development of environmental protection machinery, production and sales of enterprise, its production of a variety of filter presses, belt filter press and other products has also been widely used, and by the customer consistent received, the company's production of the filter when in operation, should pay attention to what issues?


    1, for the the undercurrent models of the pipeline installation, fluid pipeline should not be higher than the filter press out the liquid position of the mouth, in order to reduce the resistance of the filter when the liquid, and should ensure a smooth flow of liquid pipelines.

    2, in front of the compression filter plate, be sure to filter plates arranged in neat rows, and near and parallel to the only placement of the push plate end, so as to avoid the filter plate placed errors caused by the bending of the main beam;

    3, the pointer of the electric contact pressure gauge (DY), the lower limit of the factory has a good tune, users generally do not move, if the user wants to adjust the pressure, the lower limit of the subject to not leaking, the ceiling must not exceed 27Mpa;

    4, high pressure relief valve (YH) transferred at the factory prior 27Mpa, if the user wants to adjust itself to the fuel tank of nominal pressure should loosen all the high-pressure relief valve (YH), and then start the piston pump (B), slowly to adjust the high-pressure relief valve (YH) to the desired pressure, but never more than 27Mpa;

    5, the safety relief valve (YA) at the factory is transferred to 29Mpa, the user must not be arbitrarily transferred;

    6, the hydraulic oil (YA-N46, YC-N46) through the air filter should be filled into the tank, and must reach the required oil level. And to prevent sewage and debris into the tank, to prevent hydraulic components rust, clogging;

    7, the electrical box to be kept dry, pressure gauge, solenoid valve coil and various electrical components to periodic inspection to ensure that the machines work properly. To turn off the air after the shutdown switch off the power.

    8, the fuel tank, fuel tank, piston pump and pressure relief valve and other hydraulic components requiring regular cleaning of no-load operation cycle method in the general working environment of the filter is cleaned once every six months, the working oil filtering accuracy 20μm. After 1-2 weeks of use, the new machine, you need to change the hydraulic oil, dirty oil in the oil put the net, and cleaned the tank the second oil change intervals of one month, after oil change once every three months or so

    9, filter pressed after, into the start of the slurry, the feed pressure must be controlled (gauge pressure) within the specified maximum filtration pressure in the filter press, otherwise the filter plate filter box will cause deformation or cloth pressure break

    10, replace the clean-up filter plates / box, to prevent collision damage is strictly forbidden to beat, hit, so as to prevent the filter plate / box rupture, the location of the filter plate / box must not be placed in the wrong; filter not attempt to win the filter plate / box. so that the cylinder stroke is not enough and accidents; often to check the filter plate filter plate / box and the timely replacement of damaged

    11, the beginning of the filter, the inlet valve should be opened slowly, at first tend to be more turbid, filtrate and then turned clear, is a normal phenomenon;

    12, the slurry pump and the inlet valve, the wash pump and the inlet valve, compressed air and the intake valve at the same time work only allowed to open one of them;

    13, due to the capillary action of the cloth fibers, filters, filter plates between the sealing surface of clear liquid leakage is a normal phenomenon;

    14, wash cloth and filter plate / box, be careful not to let the water splashed on the power on the fuel tank;

    Fourteen my company production of filter products should pay attention to the problems at work, please read carefully. Innovation China - Professional filter manufacturers.